Service Manual

Part Number 000015432 4/18 27
Preventative Maintenance Cleaning Procedure
Perform this procedure as often as required for your water
conditions:
• Allows cleaning the ice machine without removing all
of the ice from the bin/dispenser.
• Removes mineral deposits from areas that are in direct
contact with water during the Freeze cycle (reservoir,
evaporator, auger, drain lines).
EXTERIOR CLEANING
Clean the area around the ice machine as often as
necessary to maintain cleanliness and efficient operation.
Use cleaners designed for use with stainless steel products.
Sponge any dust and dirt off the outside of the ice machine
with mild soap and water. Wipe dry with a clean, soft
cloth.
Heavy stains should be removed with stainless steel wool.
Never use plain steel wool or abrasive pads. They will
scratch the panels.
WEEKLY
Remove grill from scrap ice tray and wipe splash panel,
scrap ice tray and grill with sanitizer & water solution. Pour
excess solution in scrap ice tray to clear drain.
TOUCHLESS SENSOR ONLY
Wipe sensor window with a soft cloth and mild detergent.
Rinse with clear water and dry with a clean soft cloth.
Dust and dirt can be removed from exterior surfaces with
mild household dish-washing detergent and warm water.
Wipe dry with a clean, soft cloth.