User Manual

Part Number 020003996 3/15 31
Section 3 Operation
SENSOR BEAM
Emitter
Receiver
Beam
Sensor Beam Sequence of Operation
1. Ice fills the ice chute until it interrupts the beam.
2. Paddlewheel stops.
3. Ready for the next portioned dispense.
Adjustment
1. Loosen screws on left & right side of assembly.
Left Adjustment Screw
2. Adjust sensor board sensor eyes to the center of the
rectangular window on ice chamber.
Rectangular Window in Ice Chamber
3. Tighten screws on left and right side of assembly.
4. Test the Quickdraw.