User Manual

30 Part Number 020003996 3/15
Operation Section 3
Smallest Size /
Decrease Button
Largest Size /
Increase Button
Manual Push for
Ice Switch
Display
Hidden Program
Switch
Ice Dispense Mode
Switch
Ice Dispense
Power Switch
Auto
Manual
QUICKDRAW ICE PORTION ADJUSTMENTS
The Quickdraw ice dispensing system has adjustable ice
portion sizes. Follow the directions below to set the ice
portion size. Each portion size must be checked according
to customer specification at the time of installation.
1. To set the ice portion sizes, press the program switch 1
time in 3 seconds. The display will read “0001”.
2. Press the ice portion size that is to be adjusted. Once
the portion size that is to be adjusted is pressed, the
display will show the present pulse setting for that size.
3. To increase the portion size, press the largest size
button. To decrease the portion size, press the smallest
size button.
NOTE: The pulse count will increase, or decrease, by 1 with
each press of the smallest or largest size buttons.
4. Press the program button 1 time to exit program mode
and save settings.
5. Repeat steps 1 through 4 for each cup size as necessary.
NOTE: For Data Display Mode and Test Mode instructions,
please refer to the Quickdraw Ice Portion Control Program
flow chart in this manual.