User Manual

24 Part Number 020003996 3/15

Installation Section 2

11. Apply corresponding drink labels to the ADA key pads.

NOTE: Drinks correspond from left to right on the left side

of the unit, and right to left on the right side of the unit. If

buttons are not used they will be blanked out. The Cubed/

Crushed buttons are only utilized on units configured with

the Selectable Ice feature. (See ADA Key Pad Matrix.)

ADA Key Pad Matrix

123 45 678910

1234

Cubed Crushed

6 Valve Dispensers

12345678 910

1234 56

Cubed Crushed

8 Valve Dispensers

12345678 910

10 Valve Dispensers

34 56789 10

Cubed Crushed

Finish Installation

12. Put the splash panel and merchandiser back onto the

unit and reinstall the screws that hold them in place.

13. Restore power to the unit.

STARTING YOUR BEVERAGE SYSTEM & DISPENSER

Upon completion of the beverage dispenser and/or system

installation, all tubing, dispenser, and system components

must be cleaned and sanitized prior to use.

NOTE: At installation, equipment, dispensers, and tubing

get moved through many environments, dirt, dust, chases,

insulation, drywall, etc. It is an important procedure and

best practice to address cleaning to deliver the best quality

drink to your customer.

Important

Clean and sanitize the water and syrup circuits

according to instructions provided in this manual. Clean

and sanitize the dispenser components according to

instructions provided in this manual. Seal to countertop

when no legs are used with the unit. Consult and use

local health codes if a discrepancy occurs between this

manual and your local health codes.