User Manual

Part Number 020003996 3/15 17
Section 2 Installation
S/SV200/250/SV-250QD 8 Valve Diagram
Plumbing: 3-1-1-1-2 Manifolding
NOTE: SYRUP LINES NOT SHOWN
*OPTIONAL*
VARIETY VALVE ON #4
1 – WATER (THRU
COLDPLATE)
2 – SYRUP (AMBIENT)
3 – SYRUP (AMBIENT)
4 – SYRUP (THRU
COLDPLATE)
CO
2
Manifold: Change to carbonated or non-carbonated water.
1. Rotate plunger 180° using a 5/32" Hex Key wrench
2. Pull plunger up to get non-carbonated water.
3. Push plunger down to get carbonated water.
4. Turn plunger back 180° to lock.
PRE-CHILL OUT TO
CARBONATOR
CARBONATOR OUT TO
POST-CHILL
Plain Water (Plain
Water Supply)
Plain Water
(From Pump to
Carbonator)
Syrup Lines
*EXTERNALLY CARBONATED UNITS: CARBONATOR IS REPLACED BY BY-PASS TUBE.
FOR ASSISTANCE CALL [phone]
#1 #2 #3 #4 #5 #6 #7 #8
1, 2, 3 4 5 6 7, 8
3 1 1 1 2
8 7 6 5 4 3 2 1
2 3
1 4
VALVES
CIRCUITS
VALVES
COLD PLATE
INTERNAL
CARBONATOR
TANK (OPTIONAL)