User Manual

10 Part Number 020003996 3/15
Installation Section 2
Location Requirements for Top Mounted Ice
Machine Installations
Location — Avoid placing the dispenser and/or ice
machine near heat sources such as radiators, ovens,
refrigeration equipment and direct sunlight.
Clearances — Refer to the ice machine installation manual
for clearances.
Front of ice machine to be flush with front of dispenser
— Some ice machines may overhang at the back of the
dispenser.
Drains — A separate drain line is required for the ice
machine, in addition to a drain line for the ice/beverage
dispenser.
Dispensers may require an adapter kit to install some top-
mounted ice machines. Contact your local distributor for
the correct adapter kit.
For full information about ice machine installation,
including clearances, plumbing lines, connections, and
electrical requirements, see the ice machine installation
manual.
Pre-installation Checklist
When installing any system, first make sure the major
components are available. Generally the major components
necessary for an installation are:
Pre-mix System:

CO
2
regulator set

Product connectors for Figal tank

Gas connectors for Figal tank

Beverage dispenser

Beverage tubing

CO
2
tank

Figal beverage tanks

Stepless (Oetiker) clamps

Chain for CO
2
tank
B-I-B System also:

B-I-B connectors

B-I-B regulator set

B-I-B rack

B-I-B syrup boxes
Post Mix System:

CO
2
regulator set

Beverage dispenser

Beverage tubing

CO
2
tank

Carbonator

Stepless (Oetiker) clamps

Chain for CO
2
tank
Bulk Syrup System also:

Syrup connectors for Bulk tank

Gas connectors for Bulk tank

Bulk syrup tanks