User manual

MIDI Setup
The MIDI-Setup controls all functions that are used to play the Memotron from a suitable external
MIDI-device (e.g. master-keyboard or a MIDI-sequencer such as the Manikin Schrittmacher).
The MIDI-Setup also controls all functions to enable the Memotron to play suitable external
MIDI-equipped sound generators via its internal keyboard.
The following parameters can be edited:
Rx Channel 1 ... 16, omni MIDI-Channel that receives MIDI-data
Tx Channel 1 ... 16 MIDI-Channel that sends MIDI-data
Local Control on / off disconnects the Memotron’s keyboard from its
internal soundgeneration.
Rx Transpose –24 ... +24 transposes received MIDI-notes –/+ 24 halftones
Tx Transpose –24 ... +24 transposes transmitted MIDI-notes –/+ 24 halftones
Device ID 0 ... 126 assigns an individual ID-number when more
Memotrons are used in a MIDI-instrument setup.
Enter the MIDI setup via the main menu. A selected MIDI parameter can be edited by pushing the
DATA knob. The cursor will turn into a pointer. Turning the DATA knob will now alter the parameter
values. Pushing the DATA knob again will confirm the value changes and another MIDI parameter can
be selected by turning the DATA knob.
By pressing the ESC button you can quit the MIDI settings and return to the main menu.
Memotron OS v1.3 User Manual 17