User manual

Saving Frames
(onto a memory card)
Use the DATA-knob to browse through the menu levels until you reach the "Sound Settings" page.
Select "F:" and enter the frame menu. Selecting "Save Frame" allows you to enter a name for the
frame in question.
Turn the DATA-knob to select characters and numbers and push the DATA-knob to add them to the
frame name. By using [BACKSPACE] you can delete the last character entered. When you are done,
use [SAVE] to store the frame.
If a frame of the same name already exists on the memory card, a warning message will pop up. You
will be asked whether the existing frame is to be replaced with the new one or not. If you hit "No" the
process will be aborted, "Yes" will complete it and take you back to the sound settings page.
Deleting Frames
(from memory card)
This function deletes frames from an inserted memory card. If you wish to delete a frame from the
Memotron's internal memory (RAM), please refer to the section "Initialising Frames" on page 14.
To delete a frame from a memory card, please enter the frame menu. Selecting "Delete Frame" will
open the file directory.
Browse through the file system and select the desired frame. To quit the deleting process and leave
the directory, simply hit the ESC button.
When pushing the DATA knob, a warning message will pop up. If you hit "No", the process will be
aborted. Hitting "Yes" will complete it and take you back to the sound settings page.
! The finished initialisation process can not be made undone – please pay attention!
Memotron OS v1.3 User Manual 12