User manual

6
6. Specify a location: E x ample — E:\SATA Express_2Port\Sil3132\WinXP_2000_2003. Click
“Open,” then “OK.”
7. When the wizard indicates that it found a driver for the device, click "Next."
8. If the "Hardware Installation" prompt appears, click "Continue Anyway."
9. The wizard will now copy the required les to the system and start the driver. After starting the
driver, the wizard will display a completion prompt. Click "Finish" to exit the wizard.
Verifying Installation
For Windows 2000, XP
1. Right-click on the "My Computer" icon, select "Properties," left-click on the "Hardware" tab, then
click "Device Manager."
2. Double-click on "SCSI and RAID Controllers." If there is no yellow "!" or "?" in front of
"Silicon Image SiI 3132 SATALink Controller," the driver is started correctly.
3. To view information about the devices attached to the controller, use the SiICfg Utility and click
on the device from the list.
For Windows Vista
1. Double-click on "My Computer," select "Control Panel" and click on "SCSI Adapters." "Silicon