Specifications

9
Select another channel using Up / Down keys and you can pre-view its program details in
the top left window and then by pressing the INFO key you can also view the picture for
that channel in the top right window. Press OK if you wish to change to this channel or
press EXIT to go back to previous channel.
The blue key allows you to view the following days programs (as long as the information
is being transmitted). Use the yellow key to go back on day.
When a program has been selected, you can press the red key to enter the information
details directly in the recordings Timer Programming. If you press the red key for a
program that is playing at that time, the recording will start and you must confirm all
changes by pressing EXIT.
If the selected program has not started yet, you can press the green button to activate a
reminder on this program. A reminder will appear regardless of what channel you are
watching.
TIMER PROGRAMMING FOR VCR
Programming
7. On Repeat, select No if this is a one off recording, Weekly if you wish to record on
the same day every week, or Daily if to be recorded every day at the same time.
8. On Subtitles, select Yes or No depending whether you wish to record these as well.
9. Press OK to store the settings.
You must then program your VCR in the similar way so that it starts recording at the
same time. When recording on your VCR, remember that you have to select AUX or EXT
input on the VCR that shows the corresponding channel you have selected on the
receiver. Please refer to your VCR manual if necessary.
1. Go to Menu / Timer Programming. This menu,
lists the programs to be recorded.
2. To program a new recording, press OK on an
empty line the menu will change. See following.
3. On CN, select the channel you wish to record using
the Left / Right keys.
4. On Date, enter the date of the program with the
0~9 keys.
5. On Time, enter the time at which the program
starts.
6. On Duration, enter the duration (hours &
minutes) of the program.