Specifications
8
5. Press EXIT to quit.
Moving channels
1. Go to Menu / Service Organiser.
2. Use the Up / Down keys to select the channel you wish to move.
3. Press the green key and move the channel to the required position with the Up / Down
keys.
4. Press OK to confirm the new position.
5. Press EXIT to quit.
NOTE: The channel will keep its logical number.
Renaming a channel
1. Go to Menu / Service Organiser.
2. Use the Up / Down keys to select the channel you wish to rename.
3. Press the yellow key to view the keyboard.
4. Go to Delete using the Up / Down / Left / Right keys and press OK to delete the
current name.
5. Use the Up / Down / Left / Right keys to select one by one the letters and press OK
for every letter.
6. Press the green key to store the settings.
7. Press EXIT to quit.
ADJUSTING OUTPUT SIGNAL TO TV
1. Go to Menu / Setup / TV Setup.
2. On Television type, select 4:3 or 16:9 depending on your screen format.
3. On Widescreen option if you have a 4:3 screen, you can choose on the way a 16:9
image will appear on your TV. See below.
a) The Center Cutout mode increases the image size without distorting it to fill
the whole screen.
b) The Full Frame mode resizes the image horizontally in a 4:3 screen. The image
is therefore distorted.
c) The Letterbox mode shows a full image, with black strips at the top and
bottom of the screen.
4. On Standard, choose between RGB and CVBS. The CVBS mode (composite) gives an
image of lower quality than the RGB, but is compatible with all TVs.
5. On UHF Standard choose PAL I (for UK)
6. On UHF Channel, if you are using the UHF connection and you are getting some
interference on the picture, select a different channel and retune your TV to the new
channel.
ACCESSING THE EPG (Electronic Program Guide)
Pressing the EPG key will allow you to access the details of current and next program
playing for that channel as well as details for other channels.
The name of the program playing at the time appears
in orange in the middle right window. You can select
the following program with the Left / Right keys. A
description of the program selected appears in the
top left window.