Specifications

NOTE: If you switch on the receiver whilst a program is supposed to be recorded, you

will be requested to confirm any changes by pressing EXIT. You cannot record a channel

other than the one you are watching.

To playback a VCR tape, the receiver should be on standby. Simply insert the tape and

start playing. The image will appear on the screen. If this is not the case, press the

TV/VCR key on your VCR remote.

PARENTAL CONTROL

Your receiver is supplied with a Factory default code (PIN) that is 0000. This code

allows you to lock channels that you do not wish others to access, or to protect the

settings of the receiver. We advise you to change this code.

Modifying the PIN code

1. Go to Menu / Setup / Parental Control.

2. Enter the 4-digits code 0000.

3. Select Change PIN and press OK. Menu will change.

4. Enter the new 4-digits code using the 0~9 keys.

5. Enter this code once more.

6. Press EXIT to quit and save the settings.

IMPORTANT! Please keep your PIN code safe incase you forget your PIN code. You will

require this for accessing the menus in future.

Locking channels

1. Go to Menu / Setup / Parental Control / enter PIN

2. On Lock/Unlock Services press OK, channel list will appear.

3. Use Up / Down keys to highlight the channel you wish to lock.

4. Press OK and a lock symbol will appear next to the channel.

5. Press EXIT to quit and store the settings.

Censorship (Moral level)

The Censorship parameter in the menu allows you to adjust an age limit. The standard

value is OFF (no limits). To change, press Left / Right keys. If you change to a new limit,

the PIN code will be requested to view the program that the operator decides can only be

viewed by people older than the existing limit.

SELECTING RADIO CHANNELS

Apart from TV channels, terrestrial digital also allows you to receive radio channels. As

soon as you press the TV/R key, you enter the radio mode. From then on, the Up /

Down keys will allow you to select from one radio channel to another. To go back to the

TV mode, press TV/R key again.

RESETTING THE RECEIVER

Follow this process if you have modified the settings and hence the receiver has become

inoperative or is showing unexplainable problems. Resetting the receiver means that you

will lose all the settings you have made including Favorites, Parental lock etc.

1. Go to Menu / Setup / Service Setup / enter PIN / First Time Setup.

2. Enter your PIN code again and confirm by pressing OK.