User manual

specifications

Available in 120 V (NEMA) and 220 V (IEC) models

• Outlets: 8 NEMA (120 V), 6 backup + surge only / 2 surge only; 7 IEC (220 V), 6 back-up + surge /

1 Schuko surge only

• Times:

- Backup: 5 minutes at full load; 12 minutes at 50% load; 40 minutes at varying loads (typical with

PC and 15” LCD monitor at 85 W)

- Recharge: 8 hours typical (10 hours maximum)

- Transfer: 4-8 ms typical (10 ms maximum)

• Communications ports: RJ-45 (USB/RS232 interface), Emergency Power-Off (EPO)

• Telephone/fax/network ports: RJ-11/RJ-45 ports (1 in / 1 out), surge protected

• Nominal voltage: input, 115 V (230 V), output 115 V (230 V)

• Voltage range: input, 115 V +20% / –25% (230 V +20% / –25%)

• Frequency range: 50/60 Hz (auto sensing)

• Voltage regulation: 115 V +/– 13%

• Noise lter: full-time EMI / RFI ltering; 100 kHz to 10 MHz

• Frequency regulation: 50/60 Hz +/– 1%

• Waveform: pure sine wave

• Battery: capacity, 12 V / 7 Ah x 4; type, sealed and maintenance-free (lead acid)

• Temperatures (°C): operation, 0 to 40; storage, -20 to 40

• Operation relative humidity: 0 to 95% (non-condensing)

• LED indicators: Online, Overload, On Battery and Bad Battery

• Audible alarms: Overload, On Battery, Low Battery

Note: Speciﬁcations may change without notice.