Installation Instructions Instruction Manual

ManualsBrandsManhattan ManualsEquipment813501 Pegwall Gondola Display Starter Kit

MANHATTAN and INTELLINET NETWORK SOLUTIONS

Wall Gondola Assembly Instructions

Contents:

Required Items:

Before attempting to assemble this Wall Gondola, please gather the following items:

• Philips Screwdriver

• A 2nd person to help

Step 1

• Build 2 uprights by attaching the two parts shown below and securing with a screw.

Optional light. If a light is not included, please purchase a 30W fluorescent lamp with a 2m removable cord from

your local hardware store.

Summary of content (7 pages)

PAGE 1
MANHATTAN and INTELLINET NETWORK SOLUTIONS Wall Gondola Assembly Instructions Contents: Optional light. If a light is not included, please purchase a 30W fluorescent lamp with a 2m removable cord from your local hardware store. Required Items: Before attempting to assemble this Wall Gondola, please gather the following items: • Philips Screwdriver • A 2nd person to help Step 1 • Build 2 uprights by attaching the two parts shown below and securing with a screw.
PAGE 2
Step 2 • Stand up both uprights and attach bar across bottom as shown in callout Step 3 • Attach brace across middle as shown in callout
PAGE 3
Step 4 • Attach bottom shelf as shown. Step 5 • Gather all parts necessary to create header including the light.
PAGE 4
Step 6 • • Pass light cord through the left curved tube. After the header frame is created, the cord will need to be pushed into the hole. Create header frame as shown. This is the hole the cord will be pushed into. Step 7 • Attach light cover as shown.
PAGE 5
Step 8 • Insert light you purchased into light cover. Step 9 • Insert MANHATTAN (barcode #813198) or INTELLINET NETWORK SOLUTIONS (barcode #813204) logo as shown.
PAGE 6
Step 10 • Attach header to uprights. Insert tabs into slots and push down. Step 11 • Attach peg walls as shown. Must start with the small one on the bottom and work up.
PAGE 7
Step 12 • Attach optional accessories as needed. Bottom of shelf Additional Notes • If you will be placing 2 or more of these next to each other, you don’t need to use 2 uprights for each. One of your uprights will be from the existing display.