Owner manual
17
stop reading this section now because everything that follows
would not be
applicable to your network.
2.5.1
PIN Input Cong (PIN)
The rst method uses a PIN code to connect to the wireless network.
1. Connect to your wireless router’s conguration interface and open the section
that allows you to set up WPS. (If you need to, refer to the user manual of your
wireless router
for instructions about how to do this.) The settings on this WPS
screen of your wireless router typically included an option for PIN.
2. Find the PIN code on your Manhattan wireless utility screen — circled in red in
the example above — and enter that PIN code into the conguration of your
wireless router. The example below is from a Manhattan wireless router.
3. Click Start PIN on the router’s conguration interface. (Again, depending on
which router you have, this may be called different things.)