User manual

1 HARDWARE
1.1 Front Panel Display
LED Status Description
PWR On Router is powered on.
WLAN On Wireless network is switched on or WPS mode is on.
Flashing Wireless LAN activity (transferring or receiving data).
WAN / On WAN port is connected.
WAN LNK/ACT Flashing WAN activity (transferring or receiving data).
LAN (1-4) On LAN port is connected.
LAN LNK/ACT Flashing LAN activity (transferring or receiving data).
2.4G On 2.4GHz Wireless WPS function is enabled.
Flashing Wireless LAN activity (transferring or receiving data).
5G On 5GHz Wireless WPS function is enabled.
Flashing Wireless LAN activity (transferring or receiving data).
1.2 Back Panel Display
Feature Description
Radio Activate or deactivate the wireless function with this ON/OFF switch.
Reset/ Reset the router to factory default settings (clear all settings) or start the
WPS WPS function. Press and hold for 10 seconds to restore all settings to
factory defaults; press for less than 5 seconds to start WPS.
1-4 Local Area Network (LAN) ports 1 to 4.
WAN Wide Area Network (WAN/Internet) port.
5VDC Connects tthe A/C power adapter (5V DC).
5
HARDWARE
150N / 300N 1200AC
5VDC
1200AC
150N / 300N
5VDC
RADIO
WPS
WPS
WAN
WAN
4 3 2 1
4 3 2 1