Instruction Manual

7
Removing Adapter B from the ABC Network and
Joining with Adapters D & E (Network BDE)
As shown below, a networked Adapter (B) is removed from one existing network
(ABC) and added to another (forming BDE).
1. P ress and hold the Security button on Adapter B for 10 seconds. Release it when
the Power LED ashes. The password to Adapter B has just been erased and
removes itself from Adapters A & C.
2. Press and hold the Security button on Adapter D for 2 seconds.
3. Within 2 minutes of the Power LED on Adapter D beginning to ash, press and
hold the Security button on Adapter B for 2 seconds, then release it. Adapter B
and Adapter D are now connected to each other, which in turn becomes part of
Network BDE.
Adapter
A
Adapter
C
Adapter
E
Adapter
B
Adapter
D
Electrical Wiring
Adapter
B