Instruction Manual

6
Adding Adapter C to Existing Network AB (Network
ABC)
As shown below, one unassociated Adapter (C) is added to expand an existing
network: Network AB.
1. Press and hold the Security button on Adapter C for 10 seconds. Release it when
the Power light ashes. The password to Adapter C has just been erased and the
device must now be linked to your network to adopt the new network security key.
2. Press and hold the security button on Adapter A for 2 seconds. The Power LED
on Adapter A starts to ash.
3. Within 2 minutes of the Power LED on Adapter A beginning to ash, press and
hold the Security button on Adapter C for 2 seconds, then release it. Adapters
A, B and C are now networked to each other.
Adapter A
Adapter B
Adapter C