Datasheet

Features
RAID Level 0 (striping) increases sustained data transfer rates
RAID Level 1 (mirroring) places an identical data copy on
another drive
RAID Level 0+1 (mirrored-striping) offers the best performance
and fault-tolerant data redundancy
RAID 1+S (mirrored-sparing) can automatically replace the failed
drive and rebuild the system when booting HDD fails
Independent 256-byte FIFOs per SATA channel for host reads
and writes
Integrated PCI DMA engines
4-pin header on board for LED connection
Acts as non-RAID when not BIOS congured
Lifetime Warranty
Specifications
STANDARDS AND CERTIFICATIONS
• FCC
• CE
• SATA 1.0a
• PCI 2.2
PORTS
• 4 SATA (internal)
• Connection: L-type
• Transfer rate: 1.5 Gbps
GENERAL
• Supports Spread Spectrum in receiver
• Supports ATAPI commands
• 48-bit LBA for support of HDD larger than 137 GB
• 4-pin header for LED connection
• Independent 256-byte FIFOs per channel
• Integrated PCI DMA engines
• 32-bit, 33/66MHz PCI support
• Chipset: SiI3114
SYSTEM REQUIREMENTS
• Compatible with Windows XP/Vista/7
• Available PCI Card slot
• CD-ROM drive
PACKAGE CONTENTS
• SATA RAID PCI Controller Card
• Regular and low-prole brackets
• User manual and driver CD
Model
172592
MH-172592-DS-0109-02
Copyright © MANHATTAN
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and reproduction of this document, and use and disclosure of
the contents herein, are prohibited unless specifically authorized.
For more information on MANHATTAN products, consult your
local dealer or visit
www.manhattan-products.com
.