User manual
INSTALLATION INSTRUCTIONS
1. Insert the included driver CD in your CD-ROM drive and
make your connection to a USB port. When the Welcome
to the Found New Hardware Wizard screen displays (above),
click “Cancel” to continue with the installation.
NOTE: These are Windows XP screen images. Those for updated systems are similar.
2. On the subsequent screen, select “Install the software
automatically,” then click “Next.”
3. When the Hardware Installation warning displays (referring to
the Serial Converter), click “Continue Anyway.”
4. When the Completing the Found New Hardware Wizard
screen displays (for the Serial Converter), click “Finish.”
6. When the second Hardware Installation warning displays
(referring to the Serial Port), click “Continue Anyway.”
7. When the Completing the Found New Hardware Wizard
screen displays (for the Serial Port), click “Finish.”
5. When the screen identifying “USB Serial Port” displays (above),
select “Install the software automatically” and click “Next.”
...
8. Open the Computer Management le to conrm that the device
is listed, as shown above.