Data Sheet

Built-in safety technology that shuts off power output when metal is detected to
prevent interference or device damage
LED indicators for easy status monitoring
Overload, overcurrent and overheating protection
Effective wireless charging through phone cases up to 5 mm thick*
*External metallic accessories (such as credit cards, magnets, grips, and phone
cases) will interfere with the charging technology
Three-year warranty
Specifications:
Standards and Certifications
• CE
• RoHS
• FCC
• WEEE
General
• USB-C input: DC 5 V / 2 A – 9 V / 1.67 A
• Wireless power output:
- Input at 5 V / 2 A: 5 W
- Input at 9 V / 1.67 A: up to 10 W
• Wattage settings (maximum):
- 5 W / 7.5 W / 10 W
• Charging distance: ? 10 mm
• Charging efficiency: ? 80%
• Load capacity: 250 g (8.82 oz.)
Protection Characteristics
• Short-circuit (SCP) with auto-recovery mode
• Overvoltage (OVP) with auto-recovery mode
• Overcurrent (OCP) — current limit: 150% (max)
• Over-temperature (OTP)
Physical
• Dimensions: 121 x 73.5 x 52.1 mm (4.76 x 2.89 x 2.05 in.)
• Weight: 140 g (4.93 oz.)
• Housing: ABS + silicon rubber
• Brackets extension: 66 – 93 mm (2.59 – 3.66 in.)
• Air vent clip weight: 13 g (0.45 oz.)
• Suction cup bracket weight: 108 g (3.80 oz.)
Operating Environment
• Operation Temperature: 0 – 30°C (32 – 86°F)
• Storage Temperature: -20 – 65°C (-4 – 149°F)
• Humidity (noncondensing): 10 – 90%
For more information on Manhattan products, consult your local dealer or visit www.manhattan-products.com.
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and
reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.