USB to Serial Converter user manual Model 205146 MAN-205146-UM-0208-01
introduction Thank you for purchasing this MANHATTAN ® USB to Serial Converter, Model 205146. Modern computers are often not equipped with RS-232 ports, making the use of legacy peripherals and communication devices more difficult. The MANHATTAN USB to Serial Converter, with its serial RS-232 port, easily expands a single USB 1.1 port to connect and support serial modems, barcode scanners, digital cameras, card readers and other devices.
installation NOTE: The procedure for Windows 2000 and XP presents XP screen images, which are essentially the same as Windows 2000. Some screen images have been modified to fit the format of this manual. Windows 2000/XP 1. Insert the included driver CD in the computer’s CD-ROM drive. 2. Run the InstallShield Wizard. 3. When the wizard is finished, restart the system. 4. Connect the MANHATTAN USB to Serial Converter to the serial device and an open USB port on the computer.
2. Click “Hardware,” then click “Device Manager.” 3. The device will be presented as shown if it’s been installed properly.
specifications General • USB 1.1 • (1) USB port; Type B female • (1) RS232 ports; 9-pin male • Transfer rate: up to 225 kbps • Bus powered • Over-current protection • 45 cm (18 in. System Requirements • USB 1.1 or 2.
MANHATTAN offers a complete line of PC Components, Peripherals, Cables and Accessories. Ask your local computer dealer for more information or visit us online at ® www.manhattan-products.com Copyright © MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners.
