215BMC1 Baxter 35.43 TV Stand

ManualsBrandsManhattan Comfort Manuals32 in. to 41 in. TV StandsBaxter Collection 35" TV Stand with 2 Sliding Doors, 4 Storage Compartments, Splayed Wire Metal Legs, 2 Media Holes Wire Management and Medium-Density Fiberboard (MDF) in Black Finish

Summary of content (6 pages)

PAGE 1
PAGE 2
INCLUDED IN THE PACKAGE 07 09 02 04 08 05 09 01 03 09 08 02 05 09 06 10 10 10 10 REAR VIEW FINAL APPEARANCE - FRONT VIEW 08 08 n.
PAGE 3
TOOLS NEEDED INCLUDED IN THE PACKAGE A 20x B 8x C 4x D 4x E 4x F 8x G 38x H 16x I 8x J 2x 3
PAGE 4
STEP 1 01 • Connect the Middle Shelf (01) onto one of the Partitions (02) with dowels (A) and bolt (B). 02 STEP 2 04 09 03 01 02 09 • Connect the Left Side Panel (03) and the Right Side Panel (04) to the Middle Shelf (01) with dowels (A) and bolts (B). • Insert the plastic rail (09) into the channels of the upper and lower faces of the Middle Shelf (01). STEP 3 05 05 Preparing the Doors: • Apply the plastic guides (I) to the holes in the upper and lower edges of the Doors (05).
PAGE 5
STEP 4 • Insert the plastic rail (09) into the channel in the Base (06). • Insert the dowels (A) in the Partition (02) and in the Side Panels (03) and (04) and then connect these parts to the Base (06). 01 04 09 02 05 03 09 • Install one of the Doors (05) by attaching the guides (I) into the plastic rails (09) under the Middle Shelf (01) and on the Base (06). 06 • Finish the fastening of the Base (06) in the Partition (02) and in the Side Panels (03) and (04) applying the bolts (B).
PAGE 6
STEP 6 07 04 05 05 03 01 • Fix the metallic feet (10) under the Base (06) with bolts (H). Pay attention to the position of the feet, as shown in DETAIL 1. 02 06 10 • Apply the adhesive protective felt to the lower end of the feet (10). Adhesive Protective Felt 10 10 10 DETAIL 1 BOTTOM VIEW / POSITION OF THE FEET STEP 7 07 08 04 08 06 REAR VIEW 6 • Connect the Back Panels (08) with metal plates (F) and nails (G), applying them to the positions shown in drawing.