DIGITAL DIRECTOR - Firmware Service Procedures

DIGITAL DIRECTOR – Firmware Service Procedures - rev 1.0 – 28/09/2015
Update sequence
 Power DIGITAL DIRECTOR using fresh batteries or the AC adapter provided
 Turn DIGITAL DIRECTOR OFF using the power button (1)
 Insert the USB stick containing the updated file into the USB connector (2)
 Turn DIGITAL DIRECTOR ON and check that the DIGITAL DIRECTOR LED
Indicator (3) changes in the following sequence
o Lit solid green
o Lit blinking red
o Lit solid red
 At this point remove the USB stick, the LED Indicator will turn solid green
 Wait until the LED Indicator starts blinking green
 Turn DIGITAL DIRECTOR OFF