DIGITAL DIRECTOR - Firmware Service Procedures

ManualsBrandsManfrotto ManualsDigital Camera AccessoriesDigital Director for iPad Air 2 and Nikon and Canon DSLR Cameras

DIGITAL DIRECTOR – Firmware Service Procedures - rev 1.0 – 28/09/2015

DIGITAL DIRECTOR – Firmware Service Procedures

(Please visit www.manfrotto.com for the latest information)

Chapter.1 Manual Firmware Update

Chapter.2 Manual Firmware Restore

Summary of content (5 pages)

PAGE 1
DIGITAL DIRECTOR – Firmware Service Procedures (Please visit www.manfrotto.com for the latest information) Chapter.1 Manual Firmware Update Chapter.2 Manual Firmware Restore DIGITAL DIRECTOR – Firmware Service Procedures - rev 1.
PAGE 2
Chapter.1 Manual Firmware Update Purpose This procedure is intended to manually update DIGITAL DIRECTOR firmware in case the device cannot longer be used with the iPad and/or the automatic process through the Digital Director app cannot be completed. The update sequence must be followed carefully in order to prevent any errors or issues that could potentially damage the unit.
PAGE 3
Update sequence        Power DIGITAL DIRECTOR using fresh batteries or the AC adapter provided Turn DIGITAL DIRECTOR OFF using the power button (1) Insert the USB stick containing the updated file into the USB connector (2) Turn DIGITAL DIRECTOR ON and check that the DIGITAL DIRECTOR LED Indicator (3) changes in the following sequence o Lit solid green o Lit blinking red o Lit solid red At this point remove the USB stick, the LED Indicator will turn solid green Wait until the LED Indicator starts b
PAGE 4
Chapter.2 Manual Firmware Restore Purpose This procedure is intended to manually restore DIGITAL DIRECTOR firmware to its factory default setting in the event of the unit becoming unresponsive as a result of an error during the update process The restore sequence must be followed carefully in order to be successful. Requirements You will need the following to complete the procedure  DIGITAL DIRECTOR (models MVDDA13, MVDDA14, MVDDM14)  A narrow plastic pin (recommended size is Ø 1.5-2.
PAGE 5
Restore sequence        Power DIGITAL DIRECTOR using fresh batteries or the AC adapter provided Turn DIGITAL DIRECTOR OFF using the power button (1) Insert the plastic pin into the reset button hole, pressing the reset button inside it (2) While keeping the reset button pressed, turn DIGITAL DIRECTOR ON and check that the DIGITAL DIRECTOR LED Indicator (3) changes in the following sequence o Lit solid green o Lit solid red o Lit blinking red At this point release the reset button and remove the pla