Digital Director - Camera Compatibility chart

Digital Director – Camera Compatibility char - rev 1.3 – 28/07/2015
Chapter.2 Camera Specifics
Canon models (EOS Series)
Canon 1Dx
- To change LV photo / video mode, you must enter the [LV set.] menu on camera body;
- VIDEO mode
o ISO available only in M mode
Canon 1Dc
- To change LV photo / video mode, you must enter the [LV set.] menu on camera body;
- VIDEO mode
o ISO available only in M mode
Canon 5D Mark III
- VIDEO mode
o ISO available only in M mode
Canon 6D
- If [Wi-Fi] is set to [Enable], the camera cannot be remotely controlled via USB;
Please refer to the camera user manual to set [Wi-Fi] to [Disable]
Canon 7D Mark II
- Video shot in MP4 format with the camera disconnected from DIGITAL DIRECTOR, does not appear in the
the Digital Director App Gallery
- In VIDEO mode, it is not possible take still images
- With the camera in Manual mode, switching from PHOTO to VIDEO operation, sometimes the shutter speed
(S) and aperture (f) parameters don’t automatically refresh. In the event of this happening, switching Live
View off and on (LV OFF / ON within the Digital Director App) will resfresh the parameters
- In VIDEO mode, “Program” (P), ISO parameter cannot be changed
Canon 70D
- If [Wi-Fi] is set to [Enable], the camera cannot be remotely controlled via USB;
Please refer to the camera user manual to set [Wi-Fi] to [Disable]
- If any of the advanced AF servo functions, i.e. [Continuous AF] or [Movie Servo AF], are set to [Enable], it
could interfere with the remote focus control, resulting in unexpected behaviour;
The recommended settings for use with Digital Director are;
o [AF Method] set to [FlexiZoneAF-Single]
o [Continuous AF] and [Movie Servo AF] set to [Disable]
Please refer to the camera user manual to configure these options.
- NOTE: depending upon the interaction between the Digital Director, the camera and the lens, the three
focusing speeds may not appear to be progressive (e.g. the second speed being slower than the first one)
for some lens models