Specifications

The shortest arm at 13cm is also the most powerful. The pivoting pin is threaded with 1⁄4-20” and 3/8” studs so it can be attached to the top of a video camera to support
a small monitor or other video accessory with an exceptional load of 3.5kg.
video 55
ACCESSORIES
100MM TO 75MM ADAPTER 319
Converts all Manfrotto 100mm bowl tripods into a 75mm bowl.
100mm
Manfrotto’s new Hi-Hat enables you to get shots from the dog’s perspective.
The 529B has adjustable leg angles to mount the camera in the tightest or
lowest of locations - and thanks to the built - in spreader you can simply
use the 529B on any even surface. The feet are rubber-padded to protect
delicate surfaces and have a hole so that the 529B can be screwed to a ladder,
apple-box or a sheet of wood. Recommended Heads:
526
519 (with 319 adapter)
516 (with 500BALLSH adapter)
503 (with 500BALLSH adapter)
501HDV (with 500BALLSH adapter)
14.5cm 19.5cm 20.5cm 2.7kg 20kg
HI HAT 529B
100MM HALF BALL 500BALL
Half ball for levelling video heads on Video tripods provided with 100mm bowl.
75MM HALF BALL 520BALL
Half ball for levelling video heads on Video tripods provided with 75mm bowl.
100MM HALF BALL SHORT 500BALLSH
The 500BALLSH comes complete with a short locking handle to mount all
Manfrotto  at-base heads to the 529B Hi-Hat.
75MM HALF BALL SHORT 520BALLSH
The 520BALLSH comes complete with a short locking handle to mount all
Manfrotto  at-base heads to any 75mm bowl tripod including the 529B Hi-Hat
(with optional adapter 319).
500BALL
520BALL
500BALLSH
520BALLSH
VIDEO HEAD ADAPTER BOWL 325N
Adaptor kit to connect a 75 or 100mm half bowl video head to a  at base tripod.
This is the  rst arm that features 5/8” and 1/4” pins to support larger and heavier items. One of the two pins is hex shaped to merry perfectly with our superclamp. With a total
length of 23.5cm, the 823 is ideal to position lighting  xtures or cameras virtually anywhere. To ensure that all three feet make contact with the ground on any terrain.
11.4cm 23.5cm 0.55kg 4kg
MEDIUM HYDROSTATIC ARM 823
This arm spans 18cm and can support up to 2.2kg. The 819 is the ideal companion for attaching a video monitor to a camera or using as a  ag support. Like the 814,
the pivoting pins are 1⁄4-20” and 3/8” threaded with one side offering a platform to provide a larger footprint for the equipment being supported by the arm.
11.5cm 18cm 0.18kg 2.2kg
SMALL HYDROSTATIC ARM 819
9cm 13cm 0.16kg 3.5kg
MINI HYDROSTATIC ARM 814
823 819 814