Specifications

46 video
BASIC INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENS 521CFi
A brand new addition to the Lens Control range; the 521CFi puts all the functions of the 524CFi in a smaller clamp control suitable for use with the 595B Fig Rig, with
jib arms and in a wide variety of other shooting setups. This allows the video operator to take full advantage of the latest compact HD camcorders with interchangeable
lenses. The 521CFi offers an easy to operate progressive zoom, record/stop and RET (return - plays back last 3 seconds of footage then stops at the last recorded
frame ready to record again). A small side-mounted dial allows you to quickly and easily limit the maximum zoom speed to avoid too-fast transitions while the zoom
direction switch (also on the side of the unit) lets you change from left-right to right-left zooming. A rain cover is available as accessory (523RC).
ZOOM
REMOTE CONTROL
Manfrotto is the  rst company to offer a sin-
gle unit that will control both Fujinon and Canon
lenses. Building on the success of our Camcorder
Remote Controls and Lens-speci c Controllers;
our new Lens Controls are designed to command
both the Fujinon and Canon interchangeable len-
ses used by professional camcorders. The Intelli-
gent embedded system that allows the controller
to automatically recognise and communicate with
the lens you connect it to is what sets Manfrotto’s
Lens Controls head and shoulders above the rest.
In other words: more  exibility at a lower invest-
ment for you, less gear to carry around, less to go
wrong and all backed up by Manfrotto’s truly
worldwide service and support network.