Specifications

SPREADERS
video 35
Universal tripod spreader with variable diameter width controls from 80mm to
130mm. It accepts spiked tip tripod.
Designed for Manfrotto’s 350MVB, 350SHMVB, 351MVB, 351MVCF.
0.6kg
80 to130cm
TRIPOD SPREADER FOR
SPIKED FEET 165MV
LOW ANGLE STABILISER 165ST
Designed to increase stability only for “ oor-level” working positions. Quickly
 tted between the 165/165MV spreader and the head locking system, it gives
total rigidity with minimal torque movement even on fast pans. Designed for
Manfrotto’s 515MVB and 525MVB Tripods.
Universal tripod spreaser with variable diameter width controls from 80cm to
130cm. Designed for Manfrotto’s 055WNB, 745B, 745MF3, 755B, 755MF,
756XB, 756MF3.
0.6kg
TRIPOD SPREADER 165
MID LEVER SPREADER 350SPRB
Designed to  t the mid level leg joint casting of 350MVB, 350SHMVB,
351MVB, 351MVB2, 351MVCF tripods to provide additional rigidity and
structural support.
MID LEVER SPREADER 531SPRB
Designed to  t the mid level leg joint casting of the 515MVB and 525MVB
tripods to provide additional rigidity and structural support.
The spreader braces are telescopic.
SQUID MID LEVER SPREADER 530SPRB
Built to  t the mid level leg joint casting to provide additional rigidity and
structural support, this innovative spreader is called the “SQUID” because of its
peculiar design. Unlike most spreaders, it lets you  ne tune the spreader brace
angle to perfectly suit your working position. In combination with this continuous
angle adjustment, you can use the quick click-stop arm length presets for
rapid, precise operation. Technology used on this product is pat-pending.
80 to130cm