User's Manual

9
Unscrew knob “H”, depress button “M”, insert
the male attachment “X” on the hole “G” and
release the button. Lock firmly knob “H”: ensure
that the knob is able to seat in the recessed
safety groove on the male attachment (fig. 10)
Button “M” serves as safety catch, but it is
strongly recommend to secure the load with
appropriate safety cable (not supplied).
To dismount the pantograph proceed as follow:
HOLDING the pantograph with one hand, unlock
the knob “H” and then depress button “M”.
FIX THE PANTOGRAPH ONTO THE BARREL
Unscrew wing nut “N” to release mobile jaw “K”.
Fix the clamp onto the barrel by using the rod
“Q” and the wing nut “N”
1
2
H
G
M
X
N
Q
K
N
Q
1
2
TOP ATTACHMENT
10
TOP ATTACHMENT
11
16MM (5/8”) FEMALE ATTACHMENT
ALUMINUM CLAMP FOR PIPE DIAM 42÷52MM (1-1/4” ÷2”)
10
11