User's Manual

2
FRICTION PANTOGRAPH
1
The friction pantograph is made of aluminum
(P-Al MgSi UNI 3569) and manufactured
according to DIN 15560-46.
The load is supported by a steel cable of 2 mm
diameter (safety factor 12). Loads up to 12 kg
(26.4 lbs) can be suspended using only the
patented friction device, while loads up to a
maximum of 18 kg (39.7 lbs) require the use of
the optional springs.
In any case, it is always advisable to use the
springs to aid raising your pantograph. To
choose the proper one please refer to chapter
“CHOOSING AND INSTALLING A SPRING”.
Model FF3512 FF3514
Lifting rope 2mm wire rope 2mm wire rope
Safety factor rope 12 12
Self weight 4.6kg - 10.1lbs 7.2kg - 15.8lbs
Max working load 18kg -39.7lbs 18kg -39.7lbs
Closed length 27cm - 10.7” 37cm - 14.6”
Max extension 200cm - 79” 380cm - 150”
Width 15.6cm - 6" 15.6cm - 6"
1
WIDTH
CLOSED LENGHT
MAX EXTENSION