User's Manual
RAILS ATTACHMENTS SKY TRACK SYSTEM
BRACKET FOR CEILING ATTACHMENT FF3210
Bracket for ceiling attachment of the rail.
It is advisable to pre-assemble these brackets ontthe rails at ground level to ensure correct alignment before screwing to a ceiling.
ANGLE BRACKET (“L”-SHAPED) FOR FIXING TO BEAMS FF3212
Bracket for wall attachment of the rail.
ADJUSTABLE BRACKET FOR IRREGULAR CEILINGS FF3215
Allows height dierences in ceilings of maximum 2cm; combining two brackets you can compensate for dierences of maximum 4cm.
DOUBLE BRACKET FOR RAIL CROSSINGS FF3211
This is used to permanently attach two rails at a right angle or parallel.
The Sky Track System is a comprehensive range of lighting
suspension for all situations from small studios to the largest
ones. Manfrotto line includes the versatile ceiling mounted, rails,
manual and motorised pantographs and a wide range of brackets
and support.
RAILS SKY TRACK SYSTEM
These rails are made in section of black anodised aluminium in standard lengths
as listed. For xed rails, longer sizes are obtainable by tting two or more rails
together. Sliding rails cannot be joined. To connect two xed rails use code
FF3208. You must always support the junction of two rails with a ceiling
attachment placed on the junction itself. Moving rails longer than 3m must be
supported with more than two xed rails. The maximum distance (B) between any
of these xed rails is 2m (see drawing).
ANCHORAGE POINT
The spacing of the rail support brackets depends on the load anticipated on
the rail itself, but should generally be in accordance with the table below, “A”
indicates the distance between two anchorage points. However we advise that
xing brackets should not be spaced more than 2m apart.
BLACK ANODISED 3M RAIL FF6003B
BLACK ANODISED 4M RAIL FF6004B Not illustrated
BLACK ANODISED 5M RAIL FF6005B Not illustrated
A (mm) Weight (kg)
Rail working Max load chart
1000
1500
2000
200
100
50
B B
Mobile rails
MAX
1m/40kg
Fixed rails
Ceiling attachments
A
A
A
RAIL SECTION
34.5mm
61mm
9796