Product Info

4. Instruction of the ASCC control using switch

1) ON/OFF Main Switch

• ON/OFF function

• In case of the Standby mode, “CRUISE” Ramp turn ON

2) 『SET/– 』 Switch

• At the Stand by mode, Press SET Switch and then Control start.

» The target speed set 30 km/h when the car speed is from 0 to 30 km/h.

» When the car speed is over 30 km/h, the target speed is the same as current speed.

• If the SET switch is pressed under control, the target speed will be decreased.

» Press short period, the speed decrease 1km/h step. ex) 81→80→79→78

» Press long period, the speed decrease at first 1km/h step then 10km/h step. ex) 77→76→70→60

3) 『RES/+』 Switch

• At Standby mode, Press RES+ switch and then control start.

» After the OFF mode changed to Standby mode, the ASCC usage history have to be existed at least once.

• If the RES+ switch is pressed under control, the target speed will be increased.

» Press short period, the speed increase 1km/h step. ex) 77→78→79→80→81

» Press long period, the speed increase at first 1km/h step then 10km/h step. ex) 66→67→70→80

4) 『CANCEL』 Switch

• Released from the control condition

5) 『 Distance setting 』 switch

• Set the target headway distance(Initial value is level.4)

• Press the switch, the target headway distance value changed in the following order.

» level.4->level.3->level.2->level.1->level.4

» In case of the car speed is 90km/h

» At level 1 (1sec.), Headway distance is 25m.

» At level 2 (1.3sec.), Headway distance is 32.5m

» At level 3 (1.6sec.), Headway distance is 40m

» At level 4 (2.1sec.), Headway distance is 52.5m

• If press the switch over 2 sec, the ASCC mode is switched the CC mode each other.