Specifications

Battery Check/Low Battery Warning
After loading the batteries, press the shutter button partway to see if the data display inside the viewfinder lights. If
the display fails to light, batteries may be depleted or improperly inserted.
Low Battery Warning:
When the entire I display begins to flicker at a fast rate (8 flashes per second) batteries are low and should be replaced
promptly to ensure uninterrupted operation. The slow pulsation of the displays warns you of over and
underexposures. 4www.but kus.org
Lens Mounting/Removal
Match the red dots on the lens and Press the lens release button and turn camera body, seat the lens in the mount lens
counterclockwise until it stops. and turn clockwise until lens locks in Unseat lens from mount. place with a click.
Note on White Button: The white button serves as an auto aperture lock for shutter speed priority AE and
programmed AE operation with both E and EF lenses. To lock the ring at the index mark, press the button and
simultaneously rotate until it locks in place. To unlock the ring press button and rotate to desired aperture setting.
Caution: When not mounted, always cover both ends of lenses with lens caps to protect from dust and scratches. Do
not put lens down on its uncovered mount. Wipe electrical contacts gently with clean cloth periodically to maintain
proper contact.
Loading the Film
1. Open the back cover of the camera by pulling up on the rewind knob. (Avoid direct sunlight when loading or
unloading film.) Load the film cartridge into the film chamber of the camera and reset the rewind knob to its original
position.
2. Insert the end of the film into the slot of the film take-up spool.