Specifications

Programmed AE mode
Crossover system in effect
manual exposure operation
Exposure variation in effect (warns dial is no t set at "0")
Flash ready indication for Mamiya dedicated flash units.
Indicates maximum flash distance in meters with E lenses (and EF lenses
with focusing distance priority switch OFF)
·Features of the Crossover System
The ZE-X's Crossover System permits automatic "crossover" between the various AE modes to assure exposure-
perfect photos at all times.
1. Used with the shutter speed priority or aperture priority AE modes, the Crossover System automatically comes into
effect to correct exposure settings, when your preselected shutter speed or aperture will not give you correct exposure,
thus enabling you to obtain the best exposure possible under the prevailing lighting conditions.
2. With hand-held photography in both the shutter speed priority and aperture priority AE modes, and at all times with
the programmed AE mode, the ZE-Xis designed to maintain a shutter speed which is safe, i.e., above the "camera
shake" limit for the lens in use. So long as exposure conditions permit, you are sure of blurfree photographs.
3. If a Mamiyalite MZ 36R or MZ 18R auto electronic flash in) is used with this camera, it will not operate unless the
shutter speed in any AE mode drops below the "camera shake" limit.
· "Camera Shake" Prevention
It is the rule of thumb among professional photographers that the slowest shutter speed at which sharp pictures can be
taken with a hand-held camera is the speed closest to the reciprocal of the focal length of the lens in use counted in
seconds. Below this speed, "camera shake" is likely to occur blurring the photograph. The ZE-X is designed to
operate within the following "camera shake" limits depending on the focal length of the lenses as follows.