Leaf Credo Digital Back with Mamiya 645DF System Quick Guide 1
Quick Guide 1. Contents of Kit Contents 1. Contents of Kit.......................................................................3 • Leaf Credo digital back 2. Overview................................................................................4 • Charger for Leaf Credo battery 3. Before You Start.....................................................................6 • 12 V Power adapter and regional adapters 4. Mounting the Leaf Credo Back..............................................
2. Overview 2 1. Eyepiece shutter lever 1. Rubber eye piece 3 1 2. Hot shoe 2. Digital Back 3. Exposure mode dial 3. Self timer/interval button 4. Mirror (do not touch) 4. Main LCD backlight button 5. Electronic contacts 5. Multiple exposure button/ Focus point selector button 13 6. Lens mount alignment mark 7. Depth of field preview button 6. Auto bracketing button 12 8. Drive dial 7. Set button/Flash auto adjustment select button/ Exposure compensation button 11 9.
3. Before You Start 1. Insert camera batteries 3. Charge batteries Ensure the drive dial is set to L (off). Lift the battery case and pull out the battery holder. Check batteries are installed then return the battery holder and lock it. Connect the unit to an electrical outlet and charge each battery (approximately 2.5 to 3 hours). 4. Insert digital back battery Open the battery compartment cover and slide the battery into the battery bay in the bottom of the digital back. P M.U C S L 2.
4. Mounting the Leaf Credo Back 1. Remove the back cover from the camera. 5. While holding down the back release button, push the back and camera body together firmly. 2 1 2. Unlock the back by sliding the back lock away from the camera. 3. While holding down the back release button, remove the sensor cover plate from the back. 4. Place the bottom part of the back in the lower locking mechanism on the back of the camera body. 8 6. Release the back release button. 7.
5. Getting Started 1. Turn on the camera Switch the drive dial to "S". Choose your preferred exposure mode using the exposure mode dial. 3. Turn on the digital back Press and briefly hold the on/off button on the Leaf Credo back. The system is ready to shoot when you hear the beep and you see the home page on the screen. 2. Insert a formatted CF card A CF card can formatted in either your Credo back or computer.
6. Using the Soft Buttons 7.
. Setting Up the Digital Back 9. Taking a Shot Press the release button to start shooting.
10. Browsing Images • Tap browse soft button to access images. • Pan across image using bottom or left area. • Swipe bottom to see other images. • Side zoom control. • Single tap to select an image. • Tap screen to wake up back. • Double tap on image to view in 100%. • Zoom scaling from 6% to 400% by swiping on the right margin area.
11. Evaluating Your Shot • Tap small histogram. • View detailed histogram. • Check sharpness with zoom. • Set white balance: 1. Tap on screen to access full-screen image. 2. Tap Dynamic menu soft button. 3. Tap WB icon. 4. Use picker to select neutral balance. • Tap over-exposure warnings. Tap Dynamic soft button for more options. • Tap Exposure information.
12. Editing Your Images • Browse your images. • Rate your images. Tap Dynamic soft button for rating menu. • Tap stars to rate images. • Delete an image by tapping the Dynamic button and tapping trash icon. A long tap on a thumbnail enables multiple selection.
13. Changing the Focusing Screen 4. When installing the screen, pinch the protruding part of the screen using the screen holder, and put the screen on the screen frame. 1. Remove the lens 2. Pull the focusing screen release lever A forward, as illustrated, with the tweezers to release the focusing screen. A 5. Push the screen frame up using the tweezers until hearing a clicking sound. The screen is now properly installed. * Never press down on other parts as this will affect the focus function. 3.
14. Custom Camera Functions C-00 – Select user configuration: A, B, C C-01 – TV/AV/Exp step: 1/3, 1/2 or 1 EV C-02 – Aperture setting after lens change C-03 – Time to sleep mode (def.
15. Installing Software Leaf Limited Warranty Install Capture One Leaf warrants the digital camera back against defects in materials and workmanship for a period of one (1) year from the date of original retail purchase. Should you discover a defect, Leaf will, as its option, repair or exchange the Leaf product at no charge to you provided that you notify Leaf during the warranty period. Warranty Coverage Capture One is supplied on a CD or you can download it from http://www.mamiyaleaf.com/downloads.
http://www.mamiyaleaf.
