Instruction Manual

SECTION 2 - Output Configuration
To configure the outputs, click on the Configuration icon in the navigation bar and select
Outputs. The four outputs can be controlled by the inputs or can be programmed to switch on
and off based on a time schedule. Outputs can also have both sensor input based setpoint
control AND time control concurrently. If an output has both setpoint control AND time control
programmed, the appliance will ignore setpoint control during On time and the output will
remain On based on time schedule. However, if the output is scheduled Off based on time
schedule, setpoint control can switch it on.
Double click Output 1 icon and a new page will be served up to configure the output. In the
Name field please enter a unique identifier for the output up to 20 alpha and/or numeric
characters. If the output is only controlled by a sensor input, no additional configuration is
required.
If time based control is desired on an output, please click Enabled (default is Disabled). Click
the radio button On for each day time control is desired and fill in the start and stop time in 24
hour format. Click Save. Output is configured.
2.6.0
13.34:59
May 9, 2008
IP Sensor Appliance:
Main
Manual Control
Data Logging
Configuration
MAMAC UNO
Configuration | Password/Clock
Copyright 2008
c
www.mamacsys.com
R
Registered trademark MAMAC Systems, Inc.
Output 1
Output 2
Output 3
Output 4
: Fan
: Pump
: XXXX
: XXXX
OUTPUT CONFIGURATION
Output 2
Output 1
10:00
15:30 17:30 17:30 17:30 17:30 17:30 15:30
10:0005:00 05:00 05:00 05:00 05:00
TIME CONTROL
Start:
Stop:
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
09:00
17:00 19:00 19:00 19:00 19:00 19:00 17:00
09:0006:00 06:00 06:00 06:00 06:00
Start:
Stop:
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
Output 3
© Copyright 2008DN IS-IPPC101.1
® Registered trademark MAMAC SYSTEMS, Inc.
13 of 20