User Manual

- 7 -
F. INSTALLATION
HARDWARE INSTALLATION ON PRINTER
1 Adjusting platform
The heating platform has been adjusted and is level before leaving the
factory. It may have moved a little during transport which will affect the
printing quality. You will need to check and adjust the platform before you
start using the printer.
Adjust the platform height with the hexagon wrench which comes with the
machine. Rotating the platform screw clockwise increases the distance
between the platform and the nozzle.
Rotating the platform screw counter clockwise reduces the distance
between the platform and the nozzle.
Please move the extruder to the four corners of the platform to check and
calibrate the height.
Please keep the distance between platform and nozzle distance at around
0.5mm (A4 paper thickness).
Why do I need to adjust the platform ?
• If the heating plate and nozzle are too far apart or the platform is not
level this will lead to poor printing quality and other problems.