User Manual

- 36 -
Base Thickness
This defines how thick your raft will be.
Base line Width
This will define how wide your "support" material is for the raft. This setting
will determine how well the surface layers of the raft print.
Interface Thickness
This will determine how thick the surface layers of the raft are. The surface
layers are the platform that is built upon the supports.
Interface Line Width
This will determine how wide the top layers of the platform will be. In
general, you can keep this set to your nozzle size, as surface quality of the
removable raft is not important.
Air gap
This will define the distance between your raft and your print. A large gap
will make your part easier to remove, but will make the bottom of your print
look worse.
Surface Layers
This will determine the number of layers that create the "platform”of