User Manual

- 29 -
laying down each layer. If your layer print time falls below this your printer
will automatically slow down to reach this time before moving onto the next
layer. Tweaking this can help get cleaner, crisper prints.
Enable Cooling Fan
Enables operation of your extruder's active cooling fan. The fan settings can
be adjusted in the Expert Settings options.
1.10 Plugins
Plugins are custom settings which will alter your print at specific points. The
two that come pre-loaded with Cura are Tweak at Z, and Pause at Height.
More plugins and information can be found here:
http:wiki.ultimaker.com/Category:Cura Plug in to activate one of these
highlight the desired plugin and click the drop-down arrow directly below
the plugins box.
Tweak at Z
Make basic changes at specified Z heights. You can determine the Z height
or layer count at which you want to make a change. Then choose how you
would like to change your settings. You can alter temperatures, fan speeds,