User Manual

- 24 -
Shell Thickness
This defines the number of vertical walls that comprise the outside of your
model. We recommend keeping this set to multiples of your nozzle width.
Your Mini 3D printer is equipped with 0.4mm nozzle.
Enable Retraction
Retraction tells your printer to pull filament out of the hot end upon travel
moves. Travel moves are when your print head moves from one area of the
print, to another without laying down filament. We recommend keeping this
on for all filament types, and adjusting the retraction length and speed for
the specific filament.
Bottom/Top Thickness(mm)
Also know as "Surface Layers", this will determine how thick the top and
bottom layers are. A larger number here will create a thicker top and bottom
which can be helpful for strength, bridging, and quality purposes. We
recommend keeping this number as a multiple of your layer height.
Fill Density
This number is expressed as a percentage. 0% will give a completely hollow
print, while 100% will give you a completely solid object. We have found
that 20% to 40% fill density is functional for most prints.
Print Speed(mm/s)