Manual

ManualsBrandsMalone ManualsHardwareMPG111MD

MALONE

Installation & Loading Instructions - Please Read Before Beginning

12’ Bow & Stern LinesJawz Universal Adapters Mounting Bolts

40mm

50mm

Stax Pro Kayak Carrier 12’ Load Straps

Cogs

STAX PROSTAX PRO

VERTICAL FOLD-DOWN KAYAK CARRIER

. Insert a 100mm Bolt into the square

hole located in the top of the Base.

See image 2.

Step 1: Assembling the Stax Pro

. Insert the bottom of the Post into the

top of the Base. Position so the cogs

on the Post are in contact with the

cogs on the Base. See image 1.

. With the holes in the Base and Post aligned,

push the bolt through the two assemblies

until the end of the bolt is exposed.

Note: Confirm that the head of the bolt is

fully seated in the Base. See image 3.

Foam Blocks

Summary of content (7 pages)

PAGE 1
MALONE R STAX PRO TM VERTICAL FOLD-DOWN KAYAK CARRIER 50mm 40mm Stax Pro Kayak Carrier 12’ Load Straps Jawz Universal Adapters Mounting Bolts Foam Blocks 12’ Bow & Stern Lines Installation & Loading Instructions - Please Read Before Beginning Step 1: Assembling the Stax Pro 1 TM Cogs . Insert the bottom of the Post into the top of the Base. Position so the cogs on the Post are in contact with the cogs on the Base. See image 1. 2 .
PAGE 2
MALONE R Installation & Loading Instructions - MPG111MD Stax Pro TM 4 . Install a black round Tightening Knob onto the exposed end of the bolt. See image 4. Step 2: Installing Carriers to the Cross Rails 5 . Loosen the Tightening Knob and place the carrier into the fold-down position. Insert a Mounting Bolt into the forward side hex hole. See image 5. 6 . Insert Mounting Bolt through one hole of a Jawz Mounting Adapter and loosely apply a T-knob. See image 6. 7 .
PAGE 3
MALONE R Installation & Loading Instructions - MPG111MD Stax Pro TM 8 . Insert a mounting bolt into the rear side hex hole and down through the Jawz mounting adapter. See image 8. 9 . Apply a T-knob to the bolt and slightly tighten until the carrier is secure on the cross bar. Repeat for the second carrier and rear cross bar. See image 9. 10 . Raise the carriers to the up-position and confirm carriers are in alignment. Firmly tighten the T-knobs until both carriers are securely fixed to the cross bars.
PAGE 4
MALONE R Installation & Loading Instructions - MPG111MD Stax Pro TM 12 . Place the straps parallel to the carriers with the front strap on the windshield and the rear strap on the back of the vehicle. Place the kayak up onto the cross bar. See image 12. 13 . Place the kayak onto the foam blocks and against the carriers. Dress the free ends of the straps under the cross bar and back up and through the buckles. Pull down to tighten. See image 13. 14 .
PAGE 5
MALONE R Installation & Loading Instructions - MPG111MD Stax Pro TM 16 Step 4: Loading Two Kayaks . Place a 2nd set of Foam Blocks (purchased separately), on cross bar. Dress free ends of 12’ Load Straps (purchased separately) through the unused strap slots in the carriers. Loop and place parallel to carriers. Load second kayak. See image 16. 17 . Place the kayak onto the Foam Blocks and against the carriers. Dress the free ends of the straps under the cross bar and back up and through the buckles.
PAGE 6
MALONE R MPG370 BOW & STERN LINE KIT Attach hook to rope (steps A-D) A Thread free end of cord through hook. B C Create a “left over right” knot & tighten. D Create a “right over left” knot & tighten. Pull to test for knot strength. Attach and dress rope to vehicle and boat (steps E-O) E Attach S-hook to vehicle tow ring or other sturdy body part. F Keeping the rope tight and S-hook in place, thread the free end up and through a strong point on the kayak I Pass the loop through the opening.
PAGE 7
MALONE R Limited Lifetime Warranty The Malone Auto Racks (Malone) Limited Lifetime Warranty covers certain Malone-brand products that have been specifically identified for inclusion in the program and is effective for as long as the original retail purchaser owns the product. This warranty is terminated when the original retail purchaser sells or otherwise transfers the product to any other person or entity.