Tus neeg siv phau ntawv

English - 38© 2021 Malmbergs - All rights reservedIB v16.3.0 2021
LOCKED CABLE FUNCTION (Model with Socket)
The cable becomes locked and your socket model charging station starts behaving as an
attached cable model.
1- Turn off the power of your charging station. 2- Open the product cover as described in the
installation manual.
3- To enable locked cable function, toggle DIP switch
pin 3 to ON position using pointed spudger or a
plastic pointed tool. The DIP switch location is as
shown in below figure.
1
1
ON
2 3 4 5 6
4- Close the product cover as described in the
installation manual.
5- Open the front cover of the socket outlet and plug
the charging cable to the socket outlet.
6- Turn on the power to your charging station. The
cable becomes locked and the charging station starts
behaving as an attached cable model.
Enabled
Disabled