Tus neeg siv phau ntawv

Table Of Contents

No LED Indication

2.3.3 - VEHICLE CONNECTION & CHARGING

After conﬁguring your charger with smart application, you can control the charger via the applica-

tion either in autostart mode or in RFID authorised mode. Autostart and RFID authorised modes

are explained in section 2.1 and 2.2.

Your charging station behaves in autostart charging mode as mentioned below. But you can

continue to control the charger with smart application even it is in autostart charging mode.

a) if you do not make any conﬁguration in onboarding screens for 60 seconds and con

nect your charging cable, your charging station starts in autostart mode automatically.

b) If you delete the last RFID card from the local RFID card list, then your charger starts

to behave as autostart mode. (Detailly descriped in section 2.2.1.1 )

2.3.3.1 - SOCKET EQUIPPED MODEL

2.3.3.1.1 - VEHICLE CONNECTION & CHARGING

1 - Ensure that your vehicle and the station is

ready for charging.

2 - Insert the charging plug to the vehicle

inlet and charging station socket outlet.

3- Tap the user RFID reader or press “Charge Now” button from the application.

4sec