Tus neeg siv phau ntawv

Table Of Contents

2 - STANDALONE USAGE MODES

First usage of “Standalone Usage” mode charger: Your charger’s master RFID card is already reg-

istered to your charger and you can ﬁnd the master RFID card in accessories. When your charger

is powered in the ﬁrst time, it opens in “onboarding” screens as shown ﬁgure below. If you do not

make any conﬁguration in onboarding screens for 60 seconds and connect your charging cable,

your charging station starts in autostart mode automatically.

2.1 - AUTOSTART CHARGING MODE

Your charging station behaves in autostart charging mode as mentioned below:

a) if you do not make any conﬁguration in onboarding screens for 60 seconds and con-

nect your charging cable, your charging station starts in autostart mode automatically.

b) If you delete the last RFID card from the local RFID card list, then your charger starts

to behave as autostart mode. (Detailly descriped in section 2.2.1.1 )

2.1.1 - SOCKET EQUIPPED MODEL

2.1.1.1 - VEHICLE CONNECTION & CHARGING

1 - Ensure that your vehicle and the station is

ready for charging.

2 - Insert the charging plug to the vehicle

inlet and charging station socket outlet.

3 - Charging starts automatically, and status indicator LED glows in blue.

No LED Indication