Specifications

Fire Drum 2
Continued
Dura-Vent Universal Adapter,
Security UP Adapter, Metal-
bestos DSAC or DSA ,Or
Single Wall Chimney Adapter
Insulated Pipe
Ceiling
Sheet Metal
Screw
8" to 9" Slip
Connector
Unit
Middle Pipe Section Bottom
Fits Into Damper Section
9" to 8" Slip Connector. Sheet
Metal Screw to Chimney Con-
nector.
Single Wall Chimney Adapter
Damper Pipe Bottom Fits Into
Unit
Insulated Class "A" Chimney
System
7. First install the 8" to 9" x 18" long pipe over the chimney system's single wall adapter. Sheet
metal screw the connector to the single wall adapter using sheet metal screw in the holes
provided.
Slide the middle section of pipe over the 18" long pipe allowing enough room to insert the
damper section between the fireplace unit and the bottom of the middle pipe.
Install the damper section into the fireplace. Slide the middle pipe section into the damper
section.
8. Check that all the clearances are still within the allowable specifications.
9. Read Operating and Maintenance Instructions.
Illustration No. 8
Page - 9