Specifications

Fire Drum 2
Continued
Page - 5
15. A screen is provided and should be left in place over the opening of the fireplace at all times
when in use. The screen is lifted into place in the opening and held by the screen hinge rod
attached to the frame of the screen. The screen hinge rod engages a hole on the left of the
body channel at the top and the body hinge slug at the bottom.
16. Your fireplace unit is now ready for installation.
17. Continue on to the next section. Read Installation Instructions.
metal hood collar making sure that the slots around the circumference of the pipe are
immediately above the collar of the fireplace unit. The damper plate contained in the damper
housing should now rotate at least 90 degrees. That is, from a horizontal position to a vertical
position. (The damper plate handle is fixed in the same relative position as the damper
plate.)
Refer to Illustration No. 4
Illustration No. 4