Specifications

Fire Drum 2
Continued
baffles (if this unit included the optional convection baffles), the damper housing carton and
the additional 9" X 24" connector flue pipe carton.
4. Refer to Illustrations No. 1 and No. 2 for identification of parts and relationships referred to
in these Assembly Instructions.
5. Carefully lift out the curved side wall refractory bricks. Place these aside for later installa-
tion. Please note the top and bottom of these bricks for proper installation later.
6. Now lift out the metal cylindrical fireplace wall (body section).
7. Place the body section on the fire-bowl assembly so that it is seated in the depressions
provided for in the refractory casting. Notice that other depressions are provided around
the circumference of the back of the fireplace for the bottom edge of the body section.
Make the body section seat into this groove. At this point the body section should be
seated into all the depressions, grooves, and slots provided for it in the refractory casting.
Page - 3
Illustration No. 3