FORD POWER PROCESSOR Installation and Instruction Manual For Accel DFI part number: INSTR 79100
Power Processor Table of Contents Introduction ...................................................................................... 3 Important Tips................................................................................... 6 Safety Tips - Trouble Shooting/Tech Support ............................... 5 Power Processor Quick Menu Flow Chart - Gasoline ................... 6 Power Processor Quick Menu Flow Chart - Deisel ....................... 7 Programming Instructions ............................
Power Processor Introduction Congratulations On the purchase of your new Accel/DFI Power Processor. With over 20 years in designing and producing state of the art EFI & Ignition systems, we are confident that this Power Processor will be a great addition to your vehicle. It is designed with you, the end user, in mind to make it easy for you to use. Clear Migration: It can support more than one vehicle. You can use it on your friend’s vehicles to show them how it works. You can do that a total of 5 times.
Power Processor The Power Processor program can only be used with one (1) vehicle at a time. It can be reconnected to return the Stock programming at any time. You may also reconnect your Processor at any time to change the programming. For example; if you have replaced your factory tires with different diameter tires, you will want to correct your speedometer, odometer, and automatic transmission shift points. Simply reconnect your Processor, Change the necessary option(s), and reprogram your vehicle.
Power Processor After stock program is downloaded, start engine and let run for 1 minute, then shut engine off, disconnect battery for 15 seconds, reconnect battery, now, you are ready to go to the Dealer/Repair Shop. The Repair Facility has no way to find out if you have used a Power Programmer once you download your stock program back in. It does not leave a Foot Print. A P1000 code will set after uploading a program from the Power Processor which is the same as disconnecting the battery.
Power Processor Tech Support/Trouble Shooting ¾ Due to the technical nature of ACCEL DFI products, we are unable to answer technical questions via the Internet. If you have any questions, Please call the ACCEL DFI Technical Support hotline. Tech Line: 1-248-380-2780 from 8:30 am – 6 pm, MondayFriday, Eastern Standard Time. ¾ Please fill out and mail your warranty card.
Power Processor Power Processor Quick Menu Flow Chart Gasoline View 1) Turn Key On To Check Vehicle ID Turn Key Off Press OK Select Vehicle Power Program Return To Stock Check/Clear Codes MAX Performance 93 Octane Performance 91 Octane Advanced Tunning MAX Performance 93 Octane ON/OFF Spark Timing WOT Air/Fuel -6% to +14% LCD Contrast 0-100 Serial # XXXXXXXXX Website www.mrgasket.com Back Light ON/OFF Street 87 Octane 2000-4000 RPM -8 to +4 Degrees 4000-8000 RPM -8 to +2 Degrees 2.73 - 3.
Power Processor Power Processor Quick Menu Flow Chart Diesel view 1) Turn Key On To Check Vehicle ID Turn Key Off Press OK Select Vehicle Return To Stock Power Program MAX Performance Performance Advanced Tunning MAX Performance Performance Street Locked At TC Normal Locked Aggresi Tow/Haul Normal Agressive Lock in 1-2-3 Normal Lock Firmer Shifts Normal Firmer Firm Ware Version 1.0 LCD Contrast 0-100 Tune Revision Software 2.0 Serial # XXXXXXXXX Website www.mrgasket.
Power Processor Please ready these instructions carefully before using your Accel/DFI Power Processor. Installation - Cautions and Warnings 1 – Always follow safety & installation guideline and precautions when installing this or any other performance related component. 2 –Test system for proper operation after completing instillation. 3 – Always apply emergency brakes when working on vehicle.
Power Processor (Max Performance 93 Octane – Performance 91 Octane – Street 87 Octane). Please select the correct Power Program for the grade of gasoline you are using. Selecting the wrong Program can cause severe engine damage. (If you select default option, the processor will use the stock OEM settings for your options). 7.
Power Processor 11. Tire REVS/Mile: If you have installed tires with a larger Outer Diameter that is different than the original factory tires. This feature will allow you to adjust your speedometer and part-throttle shifting (for automatic transmissions) for the new tire O/D Size. Measure the Outer Diameter/Circumference or your tire, then input the size, 1788MM to 3218MM (Note: to convert inches to MM, Multiply inches by 25.4. Example: 88 inches OD X 25.4 = 2235 MM). 12.
Power Processor 15. Idle Speed in Drive: This option is mainly used when a cam or cylinder head modification has been done. Parameters are 450 To 1500 RPM. (Drive/In Gear RPM limit may vary depending on year and engine size of the vehicle). 16. Idle Speed in Neutral: Same as above, only the transmission is not in gear. (Neutral RPM limit may vary depending on year and engine size of the vehicle). 17.
Power Processor The highest shift point RPM you can use must always be less than the rev limit RPM. If you do hit the rev limit, the PCM will shut the fuel off until the RPM’s drop sufficiently You will have to abort that test run. The rev limiter is there to protect your valve-train and the engine from damage. Even if you went quicker every time you raised the shift point RPM, stop at 100 RPM below the rev limit. That’s the most RPM you can use safely for that shift point.
Power Processor Diesel Only Jake Brake. The Jake Brake function is used to increase exhaust backpressure when lifting of the throttle by using the Variable Gate Turbo control. This function increases the engine braking, and is useful when towing. The driver feel of this function will not be the same as an aftermarket exhaust brake, as it is only a limited amount of back pressure that can be created in this method. Locked At CT (Closed Throttle).
Power Processor Diagnose Vehicle Check DTC’s – Clear Codes – Read Strategy • Connect the Processor to the ALDL connector. Use the right side arrow to select Diagnose Vehicle, and then follow the direction on the screen. • The Processor can still be used to Check & Clear codes on any vehicle even after it locks in your VIN #.
Power Processor NOTES.
