MALIBU WIDE PLANK MOLDING INSTALLATION GUIDE Congratulations on purchasing your Rigid Core Luxury Vinyl Plank Flooring and Moldings. All Malibu Rigid Core Floors snd Moldings are manufactured under the strictest quality controls. We hope you will enjoy your new floor and Moldings. The Color of all Malibu Wide Plank Moldings will coordinate well with your Malibu Wide Plank Rigid Core Flooring.
i Molding Installation Guide TOME BELABORED Measuring Tape, Pencil, Saw/Cutting device, Scissors, Personal Protective Equipment such as Safety Glasses and hearing protection. B-lend FUNCTIONS AS A REDUCER, T-MOLD, or END QAP 4.5° WIDE ¥ 94.487 LENGTH) REDUCER This is used to transition from a higher-profile {or thickness) floor to a lower-profile floor. Cut Reducer and Track to same desired length.
a 9 Molding Installation Guide Starting at one end, place the Reducer into the Installation Track and continue “snapping” the Reducer {lengthwise} into the Track. Apply pressure across the Reducer until Reducer is in place and both edges of Reducer are snug and in position on top of the two adjoining floors. Wait 24 hours to walk on. GARTER ROUND {T° WIDE X 84.487 LENGTH} Used to create finishing touch between floor and baseboards. Measure and cut to fit. Affix molding using glue, molding tape, or nails.
Molding Installation Guide DIAGRAMS (QUARTER ROUND): DIAGRAMS (FLUSH STAIR NOSE): * For Immediate assistance and troubleshooting sapless call our Home Depot Technical Services department @ 800-928-6168
